M1500M TURNING TARGET FRAMES
SPECIFICATIONS
- Weight 36 kilos approx (for the 2 targets frame)
- Minimum height 375mm
- Overall width 1520mm with 750mm target center spacing
| m1500m_2_bank_2023_01b.pdf |
- SPECIFICATIONS
- Weight 65 kilos (for the 5 targets frame)
- Minimum height 375mm
- Overall width 4520mm with 750mm target center spacing
| m1500m_5_bank_2023_01b.pdf |
General Features
Militec Ltd. produce a range of stationary turning target frames that are capable of presenting targets to the shooter in less than 0.3 seconds.
The M1500M series uses a powerful 12Vdc 100 watt permanent magnet motor to provide a smooth turning action, with minimal target shaking, for the standard plywood backing boards.
All frames are constructed from mild steel sections which have been powder painted and stoved, or on request hot dipped zinc galvanised to prevent corrosion with all fixing being stainless steel.
Militec Ltd. produce a range of stationary turning target frames that are capable of presenting targets to the shooter in less than 0.3 seconds.
The M1500M series uses a powerful 12Vdc 100 watt permanent magnet motor to provide a smooth turning action, with minimal target shaking, for the standard plywood backing boards.
All frames are constructed from mild steel sections which have been powder painted and stoved, or on request hot dipped zinc galvanised to prevent corrosion with all fixing being stainless steel.
Mode Of Operation
The drive unit is powered from a standard sealed lead acid battery. This battery can be continually charged in situ when using the B216 battery charger.
Controlled via the C9063RM controller - 403 MHz 10mW
The drive unit is powered from a standard sealed lead acid battery. This battery can be continually charged in situ when using the B216 battery charger.
Controlled via the C9063RM controller - 403 MHz 10mW
C9063RM HANDSET CONTROLLER
SPECIFICATIONS
- Length. 210mm
- Width 100mm.
- Depth 60mm
Weight 400 grams
Power 12 Vdc from the target frame or from rechargeable AA batteries in the remote system
Control Manual operation. Programmable- FACE time 1 – 999 seconds
EDGE time 1 – 999 seconds
REPEAT Sequence 1 – 999
PAUSE Program facility
- FACE time 1 – 999 seconds
| c9063rm_remote_control_2023_01.pdf |
Militec Ltd, Unit 16, Cwm Cynon Business Park, Mountain Ash, Mid Glamorgan, CF45 4ER
United Kingdom
TEL: 00 44 (0)1443 476849 EMAIL: [email protected]
United Kingdom
TEL: 00 44 (0)1443 476849 EMAIL: [email protected]
Copyright © Militec | Terms and conditions