C9063RM REMOTE CONTROL HANDSET

Picture
Operational distance                     100mtrs. LOS
 
Size                                                    Length 210mm
                                                            Width 100mm
                                                            Depth 60mm
 
Weight                                              400grams.
 
Power                                                4 No. Internal re-chargeable NiMH batteries,  1.2V x 2500mAh.
 
Enclosure                                         Rigid ABS  UL94HBbox.
 
Radio                                                 433MHz 10mWatts max.

c9063rm_remote_control_2017_01.pdf
File Size: 186 kb
File Type: pdf
Download File
The C9063RM is a basic range controller specifically designed for operating the Multiple Turning Target Frames manufactured and supplied by Militec.
 
It is a very user friendly controller that provides a means of easily controlling either single or multiple target frames.
Manual Operation
 
  • Press EDGE key   Targets turn to edge.
 
  • Press FACE key    Targets turn to face.
 
To program the Face, Edge and Repeat settings
 
  • Press the PROG FACE key.  The display shows “Face Time?”  Enter a time between 0 and 999.9 seconds.  Press Enter.
 
  • Press the PROG EDGE key.  The display shows “Edge Time?”  Enter a time between 0 and 999.9 seconds.  Press Enter.
 
  • Press the PROG RPT key.  The display shows “No. of Repeats?” 
Enter the desired number of repeats between 1 and 99.  Press Enter.
 
  • The setting will be shown on the screen.
 
To select a Competition Program
 
  • There are two default timings, namely, Competition standard (7seconds) and Competition rapid (3 seconds) which are accessed by pressing the decimal point button.
 
  • Press Enter to make the selection between the two default settings.
The actual shoot sequence starts from the edge position.
 
  • Ensure the targets are in the Face position before the timer is started.
 
To Operate The Timer From The Program
  •        Press the START key             The display will indicate that the timer is running and status of the targets, that is, the                                                                       position the targets are at and the time decrementing.
                                                                     The display also shows, in the top right hand corner the number of cycles left.
                                                                     The timer will automatically stop once the number of cycles has been reached.
 
Notes:-                       
  • If the STOP key is pressed the targets will always turn immediately to
edge and cancel the program.
  • Similarly if the PAUSE key is pressed the program will immediately stop, a second press on the PAUSE key will start the timer from when the program was interrupted.
Militec Ltd, Unit 16, Cwm Cynon Business Park, Mountain Ash, Mid Glamorgan, CF45 4ER
United Kingdom 
TEL: 00 44 (0)1443 476849    EMAIL: sales@militec.co.uk
Copyright © Militec | Terms and conditions