LOMAH
H-BAR AND FRAME
Specifications
LOMAH H-Bar
Accuracy +/- 5 mm in center scoring area
Min. Velocity 1,150 fps (350 m/s) at target
Radio Range Line of sight out to over 2000m
Power Rechargeable batteries available with over 6+ hours of run time
Weight 10kg approx
Dimensions 1200 mm x 450 mm LxW
LOMAH H-Bar
Accuracy +/- 5 mm in center scoring area
Min. Velocity 1,150 fps (350 m/s) at target
Radio Range Line of sight out to over 2000m
Power Rechargeable batteries available with over 6+ hours of run time
Weight 10kg approx
Dimensions 1200 mm x 450 mm LxW
shooter_display_2023_01.pdf | |
File Size: | 515 kb |
File Type: |
h-bar_lomah_2023_01.pdf | |
File Size: | 501 kb |
File Type: |
PRECISION BOX TARGET SYSTEM
Developed with competition shooters in mind, the Precision Box Target System combines a modular aluminium target frame, highly accurate acoustic sensors and sophisticated signal processing electronics may be used for long-range military / LE sniper training, long-range weapons and ammunition testing.
At the firing line the shooter can see a display of their shot placement on the target and essential statistics on each shot. A combination of acoustic sensors, temperature sensors, and electronics produce accuracy levels of +/- 3mm throughout the scoring area at distances to 1,000 metres and may be installed within an indoor or outdoor range or integrated within a dedicated target pit lifting (Hythe) frame
At the firing line the shooter can see a display of their shot placement on the target and essential statistics on each shot. A combination of acoustic sensors, temperature sensors, and electronics produce accuracy levels of +/- 3mm throughout the scoring area at distances to 1,000 metres and may be installed within an indoor or outdoor range or integrated within a dedicated target pit lifting (Hythe) frame
precision_box_target_system_2024_01.pdf | |
File Size: | 571 kb |
File Type: |
AC114 FIXED FRAME
The frame is constructed from steel which and be securely installed into a target pit.
The AC114 accommodates both, the M3200M Pop-Up and LOMAH H-Bar.
Quick fit locking clamps enables the arrangement to be set up in a couple of minutes.
The AC005v3 detachable battery pack provides the 12Vdc for both units.
On occasions where only the Pop-Up is required, the LOMAH H-Bar need not be fitted.
The AC114 accommodates both, the M3200M Pop-Up and LOMAH H-Bar.
Quick fit locking clamps enables the arrangement to be set up in a couple of minutes.
The AC005v3 detachable battery pack provides the 12Vdc for both units.
On occasions where only the Pop-Up is required, the LOMAH H-Bar need not be fitted.
AC120 PORTABLE FRAME
A lightweight steel frame, the AC120 accommodates both, the M3200M Pop-Up and LOMAH H-Bar for portable applications.
For fixed applications, such as the units requiring to be installed in a pit, then special frames to suit the range can be made.
Quick fit locking clamps enables the arrangement to be set up in a couple of minutes.
The AC005v3 detachable battery pack provides the 12Vdc for both units.
On occasions where only the Pop-Up is required, the LOMAH H-Bar need not be fitted.
For fixed applications, such as the units requiring to be installed in a pit, then special frames to suit the range can be made.
Quick fit locking clamps enables the arrangement to be set up in a couple of minutes.
The AC005v3 detachable battery pack provides the 12Vdc for both units.
On occasions where only the Pop-Up is required, the LOMAH H-Bar need not be fitted.
Specifications
AC120 Location Frame
Dimensions 1055 mm x 450 mm x 215 mm LxWxH
Weight 12kg approx
Construction The enclosures are manufactured from zinc coated sheet steel and finished in polyester powdered paint that is stoved to provide a hard and durable finish.
All metal fixings used are manufactured from stainless steel.
AC120 Location Frame
Dimensions 1055 mm x 450 mm x 215 mm LxWxH
Weight 12kg approx
Construction The enclosures are manufactured from zinc coated sheet steel and finished in polyester powdered paint that is stoved to provide a hard and durable finish.
All metal fixings used are manufactured from stainless steel.
militec_lomah_ac120_2023_02.pdf | |
File Size: | 805 kb |
File Type: |
Specifications
M3200M Pop-Up Mechanism
Weight 25 Kilos (without battery pack)
Size (without batt. pk) 470mm x 400mm x 380mm LxWxH
Radio Control 1-256 individual targets with eight separate radio channels available.
Operational range up to 1000 Meters line of sight.
Hit sensing Externally mounted hit sensor set remotely from the handset.
Target response to hits set from the handset
Minimum sensitivity 100 Joules
Operation Capability A fully charged battery has sufficient capacity to lift and lower a standard Fig.11 target in excess of 2000 times.
Power AC375 Mains power pack 110Vac/240Vac to 12Vdc
AC005 Portable battery pack 12Vdc with status indication and “Quick Fit” military bayonet type connector. Weight 4.5 kilos.
Frame The tubular steel frame provides extra protection, aids carrying
and provides a stable location when in use.
Construction The enclosures are manufactured from zinc coated sheet steel and finished in polyester powdered paint that is stoved to provide a hard and durable finish.
All metal fixings used are manufactured from stainless steel.
M3200M Pop-Up Mechanism
Weight 25 Kilos (without battery pack)
Size (without batt. pk) 470mm x 400mm x 380mm LxWxH
Radio Control 1-256 individual targets with eight separate radio channels available.
Operational range up to 1000 Meters line of sight.
Hit sensing Externally mounted hit sensor set remotely from the handset.
Target response to hits set from the handset
Minimum sensitivity 100 Joules
Operation Capability A fully charged battery has sufficient capacity to lift and lower a standard Fig.11 target in excess of 2000 times.
Power AC375 Mains power pack 110Vac/240Vac to 12Vdc
AC005 Portable battery pack 12Vdc with status indication and “Quick Fit” military bayonet type connector. Weight 4.5 kilos.
Frame The tubular steel frame provides extra protection, aids carrying
and provides a stable location when in use.
Construction The enclosures are manufactured from zinc coated sheet steel and finished in polyester powdered paint that is stoved to provide a hard and durable finish.
All metal fixings used are manufactured from stainless steel.
Militec Ltd, Unit 16, Cwm Cynon Business Park, Mountain Ash, Mid Glamorgan, CF45 4ER
United Kingdom
TEL: 00 44 (0)1443 476849 EMAIL: [email protected]
United Kingdom
TEL: 00 44 (0)1443 476849 EMAIL: [email protected]
Copyright © Militec | Terms and conditions