C9200M TARGET CONTROL HANDSET
Weight 500 grams, including batteries and leather case
Size 235mm x 120mm x 60mm. (L x W x H)
Keypad operation 4 x 7 membrane keypad
Display Graphic display with contrast control
Power 4 No. 1.2V NiMH, re-charged via charge socket
Radio transceiver 400-460 MHz 100mWatt
8 separate channels with 50KHz spacing
Frequency agility Target identification address number and/or radio channel can be changed from the handset
Manual control Individual or Group or All target units
IP Protection IP65
Size 235mm x 120mm x 60mm. (L x W x H)
Keypad operation 4 x 7 membrane keypad
Display Graphic display with contrast control
Power 4 No. 1.2V NiMH, re-charged via charge socket
Radio transceiver 400-460 MHz 100mWatt
8 separate channels with 50KHz spacing
Frequency agility Target identification address number and/or radio channel can be changed from the handset
Manual control Individual or Group or All target units
IP Protection IP65
| c9200m_controller_2023_01.pdf |
The C9200M Range controller can be supplied in a range of languages, it is an easy to use radio handset, which enables the user to:-
i) manually control individual targets, groups of targets and movers.
ii) provide a simple timer facility to program and run Face/Edge/Repeat sequences.
iii) allow shoot programs configured on a PC, using the Militec PCShoot software, to operate target bases independently or in groups, with different time exposures and hit reactions.
iv) Controller to PC download lead USB to Mini USB type B
Hit results can be viewed on the screen and uploaded to the PC if required.
i) manually control individual targets, groups of targets and movers.
ii) provide a simple timer facility to program and run Face/Edge/Repeat sequences.
iii) allow shoot programs configured on a PC, using the Militec PCShoot software, to operate target bases independently or in groups, with different time exposures and hit reactions.
iv) Controller to PC download lead USB to Mini USB type B
Hit results can be viewed on the screen and uploaded to the PC if required.
Local programming Face/ Edge timing 1 to 999 secs
On the handset Sequence repeat 1 to 999 times
Internally stored
PC programming PC Shoot software
Shoot programs uploaded via USB link
Program length, 1000 seconds not including pauses
Operational capabilities 250 target units
Operational distance up to 1000 metres depending on terrain
Displays hit results for each target together with the time taken for the first bullet to hit the target after exposure
Individual hit sensor sensitivity adjustment
Battery status interrogation
Targets can be switched off remotely
Target hit reaction settings Bounce Back, target turns away after 1 - 9 hits and return to face after 1 sec
b) Turn When Hit, target turns away when hit 1 - 9 times and stays away
c) Hold target will not react to hits
Night light settings a) Lamp ON for 1 to 4 seconds on Face (selectable in 1 sec steps.), with 0.5 sec. flash when hit
b) Lamp On and stays ON until the target turns away
The C9200M handset controller is fully compatible with:
M2100M Multifunction Target Mechanism
M2200MF Fast Turning Target Mechanism
M3200M Pop Up Target
M3450M Linear Target Mechanism
M3600M Pop Up / Turner
M3720M Mini Pop Up Target Mechanism
M5150MV2 Winch Driven Target Carrier
M4500M Battery Powered Mover
M4500MF Battery Powered Mover
On the handset Sequence repeat 1 to 999 times
Internally stored
PC programming PC Shoot software
Shoot programs uploaded via USB link
Program length, 1000 seconds not including pauses
Operational capabilities 250 target units
Operational distance up to 1000 metres depending on terrain
Displays hit results for each target together with the time taken for the first bullet to hit the target after exposure
Individual hit sensor sensitivity adjustment
Battery status interrogation
Targets can be switched off remotely
Target hit reaction settings Bounce Back, target turns away after 1 - 9 hits and return to face after 1 sec
b) Turn When Hit, target turns away when hit 1 - 9 times and stays away
c) Hold target will not react to hits
Night light settings a) Lamp ON for 1 to 4 seconds on Face (selectable in 1 sec steps.), with 0.5 sec. flash when hit
b) Lamp On and stays ON until the target turns away
The C9200M handset controller is fully compatible with:
M2100M Multifunction Target Mechanism
M2200MF Fast Turning Target Mechanism
M3200M Pop Up Target
M3450M Linear Target Mechanism
M3600M Pop Up / Turner
M3720M Mini Pop Up Target Mechanism
M5150MV2 Winch Driven Target Carrier
M4500M Battery Powered Mover
M4500MF Battery Powered Mover
Militec Ltd, Unit 16, Cwm Cynon Business Park, Mountain Ash, Mid Glamorgan, CF45 4ER
United Kingdom
TEL: 00 44 (0)1443 476849 EMAIL: [email protected]
United Kingdom
TEL: 00 44 (0)1443 476849 EMAIL: [email protected]
Copyright © Militec | Terms and conditions