M5150 WINCH DRIVEN TARGETS

The M5150 winch driven target carrier unit is designed for use indoors and outdoors in a permanent situation.  The winch is driven from a DC speed controller offering up to four speeds when operated from both PCShoot the Militec computer based controller and the remote handset C9172M

 

The target unit is in essence a Militec M2100 incorporating all of the function that this mechanism provides.  The target action is powered from a 12Vdc 12AHr battery which is automatically charged via contacts on the tracks and at the bottom of the carrier.  This negates the need for any type of connection.

The mover mechanism is protected from damage by ballistic shields. There are nine grades available to protect against most threat levels, including handguns, shotguns, grenades and high velocity military rifles.

 

SPECIFICATION
Track	1100 x 400mm LxW
Max metal height	350mm
Control	PCShoot or remote handset. Personal requirements can be catered for
Remote	Remote target reaction setting from the control system
Hit feedback	Optional
Battery	Internal sealed lead acid battery

General Specifications

 

Track

Twin square steel tube.

Length

1100 mm.

Width

400mm

Height

90mm

Carrier

Integral two way turning target.

Internal sealed lead acid battery.

Automatic charging of the battery in the home position.

Integral radio receiver. 458MHz.

Integral hit sensor.

Sensitivity is set remotely from the controller.

Target responds to hits set by the controller.

Front ballistic protection panel.

500 x 350 x 12mm thick.

Motor & gearbox

180Volt DC motor.

0.37 kW. 2.5Amps.

Right angled gearbox with a double grooved pulley wheel.

Motor control & charging unit combined

240Vac 10A supply required.

DC motor control drive unit.

Four Speed control settings, up to 4m/s.

Radio receiver 458MHz.

Battery charging circuit.

Control

By radio handset controller, C9172M

or via a radio interface with the computer,

using PCShoot software in combination with static targets.