M4200 battery powered target retriever

The M4200 is a battery powered target retriever, that is floor mounted and uses an onboard directional sensing system that detects a wire embedded into the top surface of the floor. 

The system allows for a target to be presented to the shooter at one of a number of pre-selected distances, without having to go forward of the shooting line.

The turning target mechanism provides a smooth turning action 90 deg. +/- from the neutral position that is both fast and positive.

The target carrier and the turning target mechanism are radio controlled, each having its own radio address.

The instructor is able to set target exposure/away/ and repeat settings and carrier positions from the control room computer. Minimum maintenance when compared to expensive overhead systems.

SPECIFICATION
Weight	30Kg
Length	750mm
Turn Time	0.5s (edge to face)
Construction	Steel frame with front protection panel
Hit feedback	Internal Hit sensor
Speed	1 metre / second

General Features

Hit sensing

Internal hit sensor:

Sensitivity is set remotely from the handset controller.

Target responds to hits set from the controller.

 

Operational capability

A fully charged battery has sufficient capacity to turn a standard figure 11 target approx. 2000 times.

Targets can be switched off remotely from the controller.

 

Radio

Internal radio transceiver.

Frequency 458 MHz. (standard).

Eight separate channels.

 

Operational distance

25M - 50M

 

Power

Detachable battery pack with 'Quick Fit' bayonet connection.

Battery type, sealed re-chargeable 12V. 24Ahr.

Battery voltage level can be viewed on the controller.

Each battery pack has its own status indicator.

 

Ballistic Protection

There are nine grades of panel available to protect against most threat levels.

Construction

The enclosure is manufactured from zinc coated sheet steel and finished in polyester powdered paint that is stoved to provide a hard and durable finish.

All metal fixings used are manufactured from stainless steel.