M3450M Linear Target Mechanism
The M3450M Linear Target Mechanism has been developed to provide the shooter with a more realistic presentation of a target profile. Whether in the vertical or horizontal mode the exposure of the target profile mimics an actual threat in an urban environment more closely than other types of target presentations currently available.
The mechanism has two exposure settings that allow for the target to be Half or Fully exposed, providing the end user with a greater degree of flexibility when preparing training scenarios.
The mechanism is fitted within a tubular frame which allows the user to position it upright or on its side. This provides a choice of presenting the target as rising up from cover or from the side of cover.
The M3450M is compatible with Militec controllers. It can be fitted to a battery-powered carrier to provide a moving target scenario in a confined area.
| SPECIFICATION | ||
|---|---|---|
| Max. Height when in vertical mode | 680mm | |
| Depth | 250mm | |
| Width | 285mm | |
| Weight | 17 kilos | |
| Detachable battery pack | 5 kilos | |
| Target max. travel time | 0.6 sec | |
| Operational distance | Up to 1000 Metres | |
General Features
Hit sensing
Internal hit sensor:
i) Sensitivity is set remotely from the handset controller.
ii) Target responds to hits set from the controller.
Operational capability
A fully charged battery has the ability to lift a fig.12 target in excess of 2000 times.
Targets can be switched off remotely from the controller.
Radio
Internal radio transceiver.
Frequency 458 MHz. (standard).
Eight separate channels.
Operational distance
Up to 1000Metres. Standard.
Power
Detachable battery pack with 'Quick Fit' bayonet connection.
Battery type, sealed re-chargeable 12V. 12Ahr.
Battery voltage level can be viewed on the controller.
Each battery pack has its own status indicator.
Construction
The enclosure is manufactured from zinc coated sheet steel and finished in polyester powdered paint that is stoved to provide a hard and durable finish.
All metal fixings used are manufactured from stainless steel.