M3200M Portable Pop-up Target

The M3200M Pop-up Target Mechanism is the basic element for both portable and fixed infantry ranges. In the portable mode the unit is fitted within a tubular frame which provides a stable mounting on unprepared ground.

A separate 12Vdc. power pack is connected to the unit by means of a ‘Quick-Fit’ military spec. connector. This enables the M3200M to be left deployed on the range when the battery is being recharged or exchanged.

For fixed installations a 110/220Vac to 12Vdc power supply unit can be used connecting to the unit via the common power input socket.

SPECIFICATION
Weight	28 Kilos (with battery pack)
Max Size	580mm x 385mm x 370mm (LxWxH)
Max metal height	370mm
Raise / lower time	0.9 sec. for a standard target board
Hit sensing	Internal
Construction	Corrosion resistant treated steel
Finish	Dark green, BS223.  More available

General Features

 

Total weight 28 Kilos including battery pack

 
Operable without the need for extra pinning in normal operating conditions.

 

 

Operational capability

 

A fully charged battery has sufficient capacity to lift a standard Fig. 11 target in excess of 2000 times.

 

Target lift time of less than 1 sec.

 

An operational range of up to 1Km.

 

 

Radio

 

Internal radio transceiver.

 

Frequency 458 MHz. (standard).

 

Eight separate channels.

 

 

Power

 

Detachable battery pack with a 'Quick-fit' bayonet connection.

 

The battery type, sealed rechargeable 12VDC 12Ahr.

 

The battery level can be checked on the controller.

 

Each battery pack has its own battery status indicator.

 

A 110/240VAC - 12VDC PSU can be utilised on fixed ranges.

 

Remote mode selection

 

Individual or group hit response and lamp settings are set remotely from the handset.

 

 

Hit sensing

 

Internal hit sensor:-

 

i)  Sensitivity is set remotely from the handset controller.

 

ii) Target hit reactions are set from the controller.

 

 

Construction

 

A Tubular frame that provides protection, is easy to carry and enables stacking of up to four mechanisms high.

 

The enclosure is manufactured from zinc coated sheet steel and finished in polyester powdered paint that is stoved to provide a hard and durable finish.

 

All metal fixings are manufactured from stainless steel. 

 

 

Sealing

 

The M3200 is sealed to IP 67.